INSTALLATION MANUAL

Connecting to your Paradox alarm

Step 1

Locate your alarm panel. 

Step 2

Unbox your Olarm PRO. 

The Olarm PRO box includes the following:

• 1x Olarm PRO device
• 1x Connector cable
• 1x Drill hole template and LED colour legend
• 2x Screws and wall plugs 
• 1x External antenna (selected Olarm PRO models only)

Step 3

Download the Olarm mobile app and register your device. 

Search for "Olarm" in your App store.

Step 4

Connect your Olarm PRO device to your alarm panel. 

The Olarm PRO device currently supports a wide range of alarm panels including models from Paradox, Texecom, IDS & DSC. 

Different alarm system brands & models require varying ways that the Olarm PRO needs to be connected to them.

Step 5

Check your Olarm PRO’s status. 

Step 6

Mount your device. 

Mount your device using the screws and drill template provided.

Troubleshooting

If your device LED remains flashing GREEN for more than 3 minutes 

Please check the connection between the Olarm PRO and the alarm panel.

If your device LED is RED

Please check the connection between the Olarm PRO and the alarm panel.

If your device LED is ORANGE

Please ensure that the Olarm PRO is located in an area with good Vodacom and/or MTN signal strength. If it is not, please ensure that your device is connected to Wifi using the wizard inside the Olarm app.

If your device LED is not coming on

Please check the connection between the Olarm PRO and the alarm panel and that the alarm panel is connected to power.

If your device LED remains PURPLE for more than 15 minutes

Please contact Olarm Support – support@olarm.co.za